Sale
SMT - Four Quattro Peak L Plus
SMT Quattro Peak L Plus N2 reflow oven [104832]
Refurbished used equipment

- Year : 2016 - Refurbished in 2019
- Oven equipped with a nitrogen inerting system
- Dimensions (L x W x H) : 7311 x 1435 x 1765 mm – Weight : 3300 KG
- Inlet height : 950 mm +/- 20 mm
- Total length of the heating zone : 4167 mm
- Length of active heating zone : 3630 mm
* 5 preheating zones (up / down) / 3 Peak zones (up / down) - Max temperature 350°C
- Length of cooling zones : 2822 mm
* 4 cooling zones (top)
* Integrated cooling system (compressor)
- Chain conveyor
* Motorized exchange by soft
* Automatic lubrication
* Conveyor direction : Left to Right
* Min/max width : 60 - 510 mm
* PCB holder pins length : 3 mm
* Clearance height : 30 mm (top / bottom)
* Conveyor speed : 0.2 - 3 m / min.
* Central support with trapezoidal support chain
- Options :
* Speed control on 7 groups of fans
* PCB flow control and full bottom side heating
* Forced cooling (quick cycle change)
* Intelligent control and management of nitrogen input via Soft and Lambda probe
* Input flow trap
* Flow trap system (2 units) by Pyrolysis in the process area (ABS SMT system)
* Multi-zone flow trap system with cooling via interchangeable filters
* Graphic management data
* Soft start (to avoid inrush current at start)
- Food and general information:
* 400 VAC / 155A / 105KW
* Complies with CE standard
* Nitrogen consumption from 9 to 15 m3 / h
* Consumption in operation: APPROX. 12 KW / h
Sale
BTU - Four MR820N
SOLTEC - Four de refusion 7038 type 730N ROHS
Equipement d’occasion reconditionné en 2019

- Année : 2005
- L : 4.800 mm x p : 1.680 mm x H : 1.550 mm
- Convoyeur à chaînes
• Écartement motorisé ajustable par soft
• Longueur picots support cartes : 5 mm
• Graissage automatique
- Système de supportage central à chaîne
• Réglable en largeur et escamotable par soft
- Largeur de passage : 51 à 460 mm
- Sens convoyage : Gauche vers Droite
- Longueur de chauffe : 2.540 mm
• 7 zones supérieures / 7 zones inférieures
- Température maximum : 350°C
- Longueur de refroidissement : 1100 mm
• 3 zones supérieures / 3 zones inférieures
- Alimentation eau refroidissement : échangeur air / eau interne
- Comptage de cartes
- Gestion des alarmes hautes et basses
- Limitation puissance de chauffe au démarrage
- Ouverture voûte assistée par vérins électrique
- Software sous Windows XP
- Écran pour interface opérateur et supervision
- Colonne lumineuse 3 couleurs avec buzzer / 4 arrêts urgence
- Alimentation électrique : 400 Volts (3P + T) / Puissance : 56 KVA
- Alimentation azote : 6 bars
- Aspiration : 1 sorties Ø 165 mm
- Couleur : RAL 9002
Sale
Four SMT Quattro Peak L Plus
SMT Quattro Peak L Plus N2 reflow oven [104746]
Refurbished used equipment

- Year : 2009 - Refurbished in 2019
- Oven equipped with a nitrogen inerting system
- Dimensions (L x W x H) : 6714 x 1435 x 1647 mm – Weight : 2800 KG
- Inlet height : 830 - 1030 mm +/- 20 mm
- Total length of the heating zone : 4167mm
- Length of active heating zone: 3630 mm
* 5 preheating zones (up / down) / 3 Peak zones (up / down) - Max temperature 350 °C
- Length of cooling zones : 2230mm
* 3 cooling zones (top) (integrated cooling system with compressor)
* Integrated cooling system (compressor)
- Chain conveyor
* Motorized exchange by soft
* Automatic lubrication
* Conveyor direction : Left to Right
* Min/Max width : 60 – 510 mm
* PCB holder pins length : 3 mm
* Clearance height : 30 mm (top / bottom)
* Conveyor speed : 0.2 - 3 m / min.
* Central support with trapezoidal support chain
- Options :
* PCB Throughtput Control
* Full Bottom side heating
* Intelligent control and management of nitrogen input via Soft and Lambda probe
* Input flow trap
* Flow trap system by Pyrolysis in the process area (ABS SMT system)
* Multi-zone flow trap system with cooling via interchangeable filters
* Graphic Management Data
* Soft start (to avoid inrush current at start)
- Food and general information:
* 400 VAC / 135A / 90KW
* Complies with CE standard
* Nitrogen consumption from 9 to 13 m3 / h
* Consumption in operation: APPROX. 12 KW / h
Sale
Four MISTRAL 360
Technoprint Mistral 360 Reflow Oven
Refurbished equipment

- Vintage : 2000
- Reflow table without cabinet
- Dimensions (L x W x H) : 2240 x 755 x 350 mm
- Net weight : 160 KG
- Flow direction : left to right
- Stainless steel spring wires conveyor belt
- Conveyor speed : 10 - 120 cm/min. (4 - 48 inch/min.)
- Soldering width : 365 mm
- Pass through height top : 25 mm
- Length process chamber : 1400 mm (55 inch.)
- 3 pre-heat and 1 reflow zone
- Up to 300ºC for lead free soldering (572°F)
- Heat-up time : approx. 15 min
- Heated : 100% convection
- Bottom cooling fans at offload section
- PC and software
- Operator interface by screen and joystick
- Power requirements : 400 V (3 phase + N + G)
- Rated power max. : 7800 W
- 1 solder fume extraction fan
- 2 emergency stop
- Color : RAL 9002
Sale
BTU pyramax 98n (100123)
Reflow Oven BTU Pyramax 98N ROHS

- Vintage : 2004, equipment fully refurbished in 2018
- Length : 4.540 mm x Width : 1.524 mm x Height: 1.530 mm

- Pin chain conveyor
• Automatic width adjusted by soft
• height of board supporting pins: 5 mm
• Automatic greasing system
• Conveyor width : 51 - 457 mm

- Central support chain
• Adjustable width and retractable
• Automatic greeassing system

- Conveyor direction : Right to left (can be swpped to left to right

- Heating length : 2.500 mm
• 7 upper (top) zones / 7 lower (bottom) zones

- Max. heating temperature : 350°C
- Cooling zone length : 600 mm
- Flux management with trap system

- Water cooled flux trap and cooling system :
• Internal cooling by air (no external cooling system required)

- Operating under azote or air

- Nitrogen barrier system :
• Inlet : 450 mm / Outlet : 450 mm

- Closed Loop Convection Control
- Adjustable convection & cooling tpressure
- Board counter
- Programmable heating & cooling rates with alarm
- Limitation of absorbed power at start-up
- Motorized vault
- PC & software under Windows
- Operator screen for supervision with friendly interface
- 4 color signal tower with buzzer / 4 emergency button
- Color : RAL 9002
- Inlet air or azote : 6 bars
- Gas exhaust : 2 exhaust outlet Ø 130 mm
- Power inlet : 400 Volts (3P + N + T)
Sale
SOLTEC mr730n (100073)
Reflow oven Vitronics Soltec 7038 Type : 730N ROHS

- Vintage : 2005 (fully refurbished in 2018)
- Length : 4.800 mm x Width : 1.680 mm x Height : 1.550 mm
- Pin chain conveyor
• Motorized width driven by soft
• Length of board pin supports: 5 mm
• Automatic greasing system
- Central support (pin chain)
• Adjustable and removable (driven by soft)
• Automatic greasing system
- Conveyor width : 51 à 460 mm
- Sens convoyage : Gauche vers Droite
- Heating length : 2.540 mm (7 top/7 bottom)
- Maximum process temperature : 350°C
- Cooling length : 110 mm (3 top/3 bottom)
- Water cooled exchanger :
• Air cooled internal exchanger
- Board counter
- High & low temperature alarm system
- Limitation of heating power at start-up
- Motorized upper vault
- System operating under Windows XP
- Interface screen for operator & supervisor
- Signal tower with buzzer
- 4 emergency stop buttom
- Power supply : 400 Volts (3P + T)
- Azote supply : 6 bars
- Gas exhaust : 1 sorties Ø 165 mm
- Absorbed Power : 56 KVA
- Color : RAL 9002